Total height: 21~31.5cm
Comparison of with or without storage & drainage board:
Characteristic of Yiu Tsay planter box:
1. The bottom base is 2.5 cm height to retain water and fertilizer
2. With 15cm ventilation mesh of side panel, can make crops grow faster and less disease
3. Modular design! Parts can be replaced to adjust length, width and height
4. Wheels can be added for easy movement
5. Able to work with insect net
6. With PVC pipe, you can DIY frame or green tunnel
7. The height can be raised arbitrarily, so that you can plant vegetables without putting stress on your back or knees.
8. Can be matched with different kinds of side panel and choose color.
How to assemble:
Step 1: Lat the 4 bottom bases down in a rectangle as shown in the picture, and attach by sliding each unit into each other via the connecting grooves.
Step 2: Using 12 Posts insert the smaller end into the perimeter sockets of the bottom base. Pusht the posts into the place until they are fully seated into the sockets. Slight tapping with a hammer helps seat the posts into the base.
Step 3: Using the 4 end panels and 4 side panels, insert them into the post grooves on each side, make sure the pointed up arrows are on the outside of the panel. Slide the panels down until the click into the place.
Step 4: Install the 4 "L" shaped top frame parts on the top of the perimeter posts. Connecting the "L" shapes frames to each other by sliding them together via the grooves as shown in the picture. Finish by lightly tapping all the sockets of the top frame to fully seat into the posts.
Step 5: Install the 4 single top caps & 4 double top caps to the posts on the top frame. Install the 4 single leg caps & 6 double leg caps to the underneath posts of the lower frame. Install the Quad base cap inside the center of the planter box and slight tapping with a hammer to help seat the caps on the posts.
