Can increase water storage capacity, bottom base can supply water and recycle, to reduce watering frequency and maintenance costs.
If you need bottom base water supply and rainwater reclamation, please refer to model B&C for pipe connection.
Note
1. Model code ends with "A" without connecting pipe:
The double holes in the curved base are sealed with connecting pipe plugs, there is no connecting pipe configured and can retain water directly.
2. Model code ends with "B" with single connecting pipe:
Use connecting pipe plug to seal one hole in the curved base, and assemble a connecting pipe to drain water in another hole.
(Example: the yellow connector on the left side can unscrew to release water)
3. Model code ends with "C" with double connecting pipe:
Assemble two connecting pipes in each side of the curved base to store and drain water.
(Example: the yellow connector on the left side can unscrew to release water, and the right side can connect a 1/2" water pipe)
Product Features
By using the planter box module to extend and create the "Storage and drainage curved base".
The interior can store and drain water effectively , and the waved shape at bottom can carry more weight.
The standard equipment do not contain elevated leg, which is suitable to use for flower nursery and water retain, etc.
One curved base can store about 8 liters of water. It is recommended to lay LECA (Lightweight Expanded Clay Aggregate) and then put the drainage board on to place the medium.
